Durston Mallet Rawhide & Lead Ø32mm

19,40pc hind KM-ta 15,90€

The Sunburst hammer is a must-have in any jewellery workshop to shape and mould metal without leaving marks.

Lisa 90,00 eest veel tooteid, et saada TASUTA DPD pakiautomaati saatmine!

Kehtib Baltikumis, Soomes ja Rootsis
Tuotetunnus (SKU): 1220 Osasto:
Kuvaus

Kuvaus

TDurston Rawhide Hammer is screwed and glued with a hickory handle.

The head of the hammer is made of dense rolls of leather (hide) impregnated with resin or shellac for hardening and placed on a wooden handle.

The hammer must be conditioned before use. We recommend .

Put a hammer between the gravel bars and grind down the hardening material – the ends can be made with a coarse grinder . Once removed , soak in water for almost an hour , dry and sand again.
Afterwards, you don’t see any spirals in the skin but rather like the inside of a piece of skin and have a soft surface.

It sounds a bit laborious but the time it takes to do it will give you the best result. Remember that a rubber or polymer hammer cannot be reused if one of the hammer surfaces is damaged unless it has been professionally repaired.

Head dimensions: 32mm x 63mm
Total length including head: 225mm

Weight: 125 g

Lisätiedot

Lisätiedot

Paino 400 g
Brand

Durston

Arviot (0)
0 reviews
0
0
0
0
0

Tuotearvioita ei vielä ole.

Kirjoita ensimmäinen arvio tuotteelle “Durston Mallet Rawhide & Lead Ø32mm”

Sähköpostiosoitettasi ei julkaista. Pakolliset kentät on merkitty *